They combine advantages of electronic controllers with digital circuit “intelligence”. A possibility to program temperature in 24h and a week cycle. A possibility to read out on a LCD such data as: a room real temperature, previously programmed comfort and economic temperatures, a heating system operating time, a program number and its graphical image. Selected models have an adaptation function: the temperature controller “calculates” itself the heating switching off moment to reach a desired temperature at a programmed time. Load up to 3600 W. They can be surface or flush mounted.

type  Elektra MWD5 WiFi Elektra MCD5
floor sensor  +  +
air sensor  +  +
floor protecting sensor (°C) from +10 to +40 from +10 to +40
wireless controll (WiFi) +
installation  flush flush
supply (V) 230 230
control range (°C) from +5 to +40 from +5 to +40
temperature setback (°C) from +5 to +40 from +5 to +40
open window detection + +
max. load (W) 3600 3600
switch   2-pole   2-pole
hysteresis (K) PI* PI*
ingress protection (IP) 21 21
dimensions (H x W x D) (mm) 82 x 82 x 40 82 x 82 x 40

* adaptative system (proportional-integral) adjusting the deviation to the set temperature depending on the duration of the temperature’s increase or decrease. Due to this feature the controller’s operational characteristics is self-adjusted to ambient conditions, in real time.

ELR20 Temperature Controller ELR30_smart
type  Elektra ELR20 Elektra ELR30 WiFi
floor sensor + +
air sensor + +
floor protecting sensor (°C) from +16 to +60 from +16 to +60
wireless controll (WiFi) +
installation flush flush
supply (V) 230 230
control range (°C) from +5 to +90  from +5 to +90
temperature setback (°C) from +5 to +90  from +5 to +90
open window detection +  +
max. load (W) 3600 3600
switch   2-pole
hysteresis (K) 0,5 ÷ 10  0,5 ÷ 10
ingress protection (IP) 20  20
dimensions (H x W x D) (mm) 90 x 86 x 45 86 x 86 x 46 mm