The Electronic 6-event Temperature Controller ELEKTRA OCD4 is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller with built-in air sensor and floor sensor. Possible configuration of 3 temperature measurement methods through: air sensor, floor sensor or air and limitation floor sensor. Compatible with most of floor sensors in the market. New advanced Dot Matrix multilanguage display.






Technical Data:
Power supply: 230 V ~ 50/60 Hz
Max. load: 16A, 230 V ~ 50/60 Hz
Installation: flush mounting
Built-in switch: 2-pole, 16A
Clock functions: up to 6 programmed events for each day
Comfort temperature range: +5°C ÷ +40°C for each event
Economical temperature range: +5°C ÷ +40°C for each event
Limitation floor sensor:
– Min.: +5°C ÷ +40°C or OFF
– Max.: +5°C ÷ +40°C or OFF
Manual work mode:
– temperature range: +5°C ÷ +40°C
– work time: to the next event or to the cancellation
Difference/Hysteresis: 0.4K
Protection: IP 21
Work signalization: display function
Dimensions (H x W x D): 84 x 84 x 40 mm
Display dimensions (H x W): 25 x 37 mm, 100 x 64 pixel STN with backlight
Certificates: GOST-R, VDE, BEAB, NEMKO
Product mark: CE